can you tell me plz how to inject 12 volts to the LNB !
The transponder that you mention are on Astra 28.2°E, not 19.2°E like canal+
It's an other satellite. Do you receive this satellite ? do you have 2 parabols ? how is configured your diseqC ?
seba a écrit :Hi,
The other transponder in horizontal polarisation work ? It's like there is a problem with the horizontal polarity.
You need to know that a voltage of 12 Volts is injected to the LNB for vertical polarisation and 18 Volts for the vertical polarisation. There is may be a problem with horizontal polarisation.
Canal+ France use transponder is vertical.
the others(H) works perfect
how to check that the 13 and 18 volts is injected to the LNB and witch for the V and the H .
if it's not injected , how to inject it to LNB , you suggest any specific setting !
i have only one dish and im using astra 19.2 and the mentioned frequencies from the official website ,
if you can provide with the correct frequencies i will be grateful,
disq configuration is off , tell me if there is any correct configuration
thank you !
If it's only Sky DE Frequency, I don't see why.
thank you !
LNB receive a power of 13V to work. With 13 Volts the LNB receive vertical frequency.
To swithc to Horizontal frenquency, receiver send 18V.
To switch from low band (10,7–11,7 Ghz) to High band (11,7–12,75 Ghz) receiver send a 22Khz tone.
Then, you need to check if you have the problem with horizontal frenquency in low and high band. If yes, check when you tune horizontal frenquency, if you have 18v on the cable to the lnb. If yes, your LNB is problably defect.
Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 2 invités